Amplifier Modules
AM2 Series
DSP powered amplifier module, 1 in / 2 out, 24-bit at 48 kHz, 300 W to 1200 W per channel at 8 ohm, S/N over 115 dB.
Specifications
- Type
- DSP powered amplifier module
- DSP configuration
- 1 in / 2 out, 24-bit @ 48 kHz (standard)
- Output power @ 8 ohm
- 300 W - 1200 W per channel
- Signal-to-noise ratio
- over 115 dB (A-weighted)
- Frequency response
- 20 Hz - 20 kHz (+/-0.5 dB)
- Damping factor
- over 500 @ 100 Hz
GENERAL SPECIFICATIONS
Type | DSP powered amplifier module |
DSP configuration (standard) | 1 in / 2 out, 24-bit @ 48 kHz (2-in / 2-out optional) |
Frequency response | 20 Hz - 20 kHz (+/-0.5 dB) @ 1 W, 8 ohm |
Signal-to-noise ratio | > 115 dB (20 Hz - 20 kHz, A-weighted) |
Crosstalk isolation @ 1 kHz | -71 dB (AM2-300DSP -85 dB) |
THD + N (0.1 W to half power) | < 0.09% (AM2-300DSP < 0.08%) |
DIM 100 | < 0.09% (AM2-300DSP < 0.08%) |
Input impedance | 10 kohm balanced |
Slew rate | 50 V/us @ 8 ohm, input filter bypassed |
Damping factor | > 500 @ 100 Hz |
Operating voltage | AC 100-240 V +/-10%, 50-60 Hz |
MODEL LINE-UP
AM2-1200DSP | Output @ 8 ohm 2 x 1200 W · Output @ 4 ohm 2 x 1800 W · Bridged @ 8 ohm 3000 W · Gain 32 dB · Input sensitivity 2.45 V / +10 dBu · Dimensions 370 x 155 x 90 mm |
AM2-1000DSP | Output @ 8 ohm 2 x 1000 W · Output @ 4 ohm 2 x 1500 W · Bridged @ 8 ohm 3000 W · Gain 32 dB · Input sensitivity 2.2 V / +9 dBu · Dimensions 370 x 155 x 80 mm |
AM2-800DSP | Output @ 8 ohm 2 x 800 W · Output @ 4 ohm 2 x 1200 W · Bridged @ 8 ohm 2000 W · Gain 32 dB · Input sensitivity 2.2 V / +9 dBu · Dimensions 370 x 155 x 80 mm |
AM2-600DSP | Output @ 8 ohm 2 x 600 W · Gain 35 dB · Input sensitivity 1.2 V / +4 dBu · Dimensions 368 x 110 x 80 mm |
AM2-300DSP | Output @ 8 ohm 2 x 300 W · Output @ 4 ohm 2 x 600 W · Bridged @ 8 ohm 1200 W · Gain 33 dB · Input sensitivity 1.1 V / +3 dBu · Dimensions 368 x 110 x 80 mm |